Home / Washington / Waverly
Water Damage Restoration in Waverly, WA
Emergency water removal, drying, and frozen pipe cleanup for homes in Waverly, the small Spokane County town on Latah Creek south of Spokane.
Quick answer
For water damage in Waverly, WA, shut off your main valve first, or turn off the well pump breaker if you are on a private well. For a leak on the town side of the meter, call Waverly Town Hall at 509-283-4122. Then call a water damage restoration company; drying should start within 24 to 48 hours. Report the claim to your insurer as soon as you can.
Do this first
Local water and sewer lines.
Town Hall is at 255 N. Commercial St. The town runs its own water system.
- Shut off the water. Close the main valve where the line enters the house, or turn off the well pump breaker if you are on a private well. For a leak on the town side of the meter, call Waverly Town Hall at 509-283-4122.
- Make it safe and document it. Cut power to wet rooms from a dry spot, photograph the damage, then report the claim.
- Start drying within 24 to 48 hours. Most Waverly homes are manufactured or mobile homes. Check the supply lines under the floor and the water heater closet first.
Waverly is a very small town with part-time staff, so Town Hall may not answer after hours. Shut off your own main valve first.
What to know about water damage in Waverly
$500,000
The cost of the beet sugar factory that opened on Latah Creek in December 1899. It closed in 1910.
Sources: Wikipedia, The Spokesman-Review
Freezes and precipitation
The NOAA weather station at Rosalia, about 9.5 miles away, averages 145.5 nights a year at or below 32°F and 31.2 at or below 20°F. In half of years the first freeze comes by September 28 and the last one after May 7. Pipes in outside walls, unheated basements, and crawlspaces are the first to split. It also averages 18.4 inches of precipitation a year, counting melted snow.
Named for Iowa
Two settlers named the town in 1879 after Waverly, Iowa. The first post office was at a home on Hangman Creek, now called Latah Creek.
Source: Wikipedia
A sugar town
The factory employed 150 workers, with up to 400 more in the beet fields at harvest. After it closed, the town shifted to farming.
Sources: Wikipedia, The Spokesman-Review
Town water
The town provides water, street maintenance, and parks with part-time staff.
Source: Washington State Auditor
Homes in Waverly
There are about 60 homes. About 92% are owner-occupied, and about 80% are mobile homes.
Check your ZIP
Cost and insurance in Waverly
How much does water damage restoration cost in Waverly?
Most jobs run $450 to $16,000 (Angi). Creek or snowmelt water that flows in from outside is a flood loss, which needs a separate flood policy. In a manufactured home, ask the crew to check the subfloor and the insulation in the belly wrap, which hold water out of sight.
Water removal and restoration in Waverly
The company that answers handles frozen pipes, mobile home plumbing leaks, water heater failures, supply line leaks, and appliance hose failures, plus burst pipes, appliance leaks, drying, and septic backups.
Waverly questions
Who do I call about Waverly town water?
Waverly Town Hall, at 509-283-4122.
When did Waverly become a town?
It was incorporated in 1907.
What happened to the Waverly sugar factory?
It opened in 1899 and closed in 1910.
What creek runs through Waverly?
Latah Creek, once called Hangman Creek.
Related guides
Other Washington towns- Sewage backup: what to do first
- Water mitigation vs. restoration
- Burst pipe repair cost
- Washington insurance claim rules, in plain English
- Frozen and burst pipes: what to do
- Does homeowners insurance cover water damage?
- How long water damage takes to dry
Local phone numbers checked November 2026: